Operation Time - Cisco 300 Series Cli Manual

23
348
Parameters
N/A
Default Configuration
The interface is enabled.
Command Mode
Interface Configuration (Ethernet, Port-channel) mode
Examples
Example 1 - The following example disables gi5 operations.
switchxxxxxx (config)#
(config-if)#
switchxxxxxx
switchxxxxxx (config-if)#
Example 2 - The following example restarts the disabled Ethernet port.
(config)#
switchxxxxxx
(config-if)#
switchxxxxxx
(config-if)
switchxxxxxx
23.4

operation time

Use the operation time Interface Configuration (Ethernet) mode command to
control the time that the port is up. Use the no form of this command to cancel the
time range for the port operation time.
Syntax
time-range-name
operation time
no operation time
interface gi5
shutdown
interface gi5
no shutdown
78-21075-01 Command Line Interface Reference Guide
Ethernet Configuration Commands