Macro Global - Cisco 300 Series Cli Manual

Macro Commands
78-21075-01 Command Line Interface Reference Guide
Interface Macro Description(s)
------------ --------------------------------------------------
gi2 dup
gi3 duplex | dup | duplex
--------------------------------------------------------------
switchxxxxxx#configure
switchxxxxxx(config)#interface gi2
switchxxxxxx(config-if)#no macro description
switchxxxxxx(config-if)#end
switchxxxxxx#show parser macro description
Global Macro(s):
Interface Macro Description(s)
--------- -----------------------------------------------------
gi3 duplex | dup | duplex
--------------------------------------------------------------
switchxxxxxx#
3.4

macro global

Use the macro global Global Configuration command to apply a macro to a switch
(with or without the trace option).
Syntax
apply | trace} macro-name [parameter-name1 {value}]
macro global {
[parameter-name2 {value}] [parameter -name3 {value}
Parameters
•
apply—Apply a macro to the switch.
•
trace—Apply and trace a macro to the switch.
•
macro-name—Specify the name of the macro.
•
parameter-name
for the switch. You can enter up to three parameter-value pairs. Parameter
value
—(Optional) Specify the parameter values required
]
3
61