Show Platform Configuration - Cisco Catalyst 3030 Command Reference Manual

show platform configuration

show platform configuration
Use the show platform configuration privileged EXEC command to display platform-dependent
configuration-manager related information.
Syntax Description
config-output
default
running
startup
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.2(25)SEE
Usage Guidelines
You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Cisco Catalyst Blade Switch 3030 Command Reference
C-4
show platform configuration {config-output | default | running | startup} [ | {begin | exclude |
include} expression]
Display the output of the last auto-configuration application.
Display whether or not the system is running the default configuration.
Display a snapshot of the backed-up running configuration on the local
switch.
Display a snapshot of the backed-up startup configuration on the local switch.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Appendix C Cisco Catalyst Blade Switch 3030 Show Platform Commands
78-17262-01