Speed - Cisco 300 Series Cli Manual

23
350
Parameters
string—Specifies a comment or a description of the port to assist the user.
(Length: 1–64 characters).
Default Configuration
The interface does not have a description.
Command Mode
Interface Configuration (Ethernet, Port-channel) mode
Example
The following example adds the description 'SW#3' to gi5.
(config)#
switchxxxxxx
switchxxxxxx (config-if)#
23.6

speed

Use the speed Interface Configuration (Ethernet, Port-channel) mode command to
configure the speed of a given Ethernet interface when not using auto-negotiation.
Use the no form of this command to restore the default configuration.
Syntax
{10 | 100 | 1000 | 10000}
speed
no speed
Parameters
•
10—Forces10 Mbps operation.
•
100—Forces 100 Mbps operation.
•
1000—Forces 1000 Mbps operation.
Default Configuration
The port operates at its maximum speed capability.
interface gi5
description SW#3
78-21075-01 Command Line Interface Reference Guide
Ethernet Configuration Commands