Cisco 300 Series Cli Manual page 478

31
478
Bridge ID Priority
Address
Hello Time 2 sec
Interfaces
Name State Prio.Nbr
--------- ------- ------
gi4 Enabled 128.4
switchxxxxxx# show spanning-tree detail
Spanning tree enabled mode RSTP
Default port cost method: long
Root ID Priority
Address
Path Cost
Root Port
Hello Time 2 sec
Bridge ID Priority
Address
Hello Time 2 sec
Number of topology changes 2 last change occurred 2d18h ago
Times: hold 1, topology change 35, notification 2
hello 2, max age 20, forward delay 15
Port 1 (gi1) enabled
State: Forwarding
Port id: 128.1
Type: P2p (configured: auto) RSTP
Designated bridge Priority: 32768
Designated port id: 128.25
Guard root: Disabled
Number of transitions to forwarding state: 1
BPDU: sent 2, received 120638
36864
00:02:4b:29:7a:00
Max Age 20 sec Forward Delay 15 sec
Cost Sts Role
----- --- ----
19 BLK Altn
32768
00:01:42:97:e0:00
20000
gi1
Max Age 20 sec Forward Delay 15 sec
36864
00:02:4b:29:7a:00
Max Age 20 sec Forward Delay 15 sec
Role: Root
Port cost: 20000
Port Fast: No (configured:no)
Address: 00:01:42:97:e0:00
Designated path cost: 0
BPDU guard: Disabled
78-21075-01 Command Line Interface Reference Guide
Spanning-Tree Commands
PortFast Type
-------- ----------
No Shared (STP)