Cisco 300 Series Cli Manual page 621

Link Layer Discovery Protocol (LLDP) Commands
78-21075-01 Command Line Interface Reference Guide
Switch# show lldp configuration
State: Enabled
Timer: 30 Seconds
Hold multiplier: 4
Reinit delay: 2 Seconds
Tx delay: 2 Seconds
Notifications interval: 5 seconds
LLDP packets handling: Filtering
Port State Optional TLVs
-------- ----- --------------
gi1 RX,TX PD, SN, SD, SC
gi2 TX PD, SN
gi3 RX,TX PD, SN, SD, SC
gi5 RX,TX D,
gi6 RX,TX PD, SN, SD, SC
gi7 RX,TX PD, SN, SD, SC
gi8 RX,TX PD, SN, SD, SC
Example 2 - Display LLDP configuration for port 1.
Switch# show lldp configuration gi1
State: Enabled
Timer: 30 Seconds
Hold multiplier: 4
Reinit delay: 2 Seconds
Tx delay: 2 Seconds
Notifications interval: 5 seconds
LLDP packets handling: Filtering
Port State Optional TLVs
-------------- -------------- ------------------------
gi1 RX, TX PD, SN, SD, SC
Address
-------
172.16.1.1
172.16.1.1
None
SN, SD, SC automatic
auto vlan 1
auto g1
auto ch1
Address
72.16.1.1
Notifications
------------
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Notifications
Disabled
37
621