Show Mac Address-Table Count - Cisco 300 Series Cli Manual

29
434
Examples
Example 1 - Displays entire address table.
switchxxxxxx# show mac address-table
Aging time is 300 sec
VLAN MAC Address
-------- --------------------- ---------- ----------
1 00:00:26:08:13:23
1 00:3f:bd:45:5a:b1
1 00:a1:b0:69:63:f3
2 00:a1:b0:69:63:f3
Example 2 - Displays address table entries containing the specified MAC address.
switchxxxxxx# show mac address-table 00:3f:bd:45:5a:b1
Aging time is 300 sec
VLAN MAC Address
-------- --------------------- ---------- ----------
1 00:3f:bd:45:5a:b1

29.26 show mac address-table count

Use the show mac address-table count EXEC mode command to display the
number of addresses present in the Forwarding Database.
Syntax
show mac address-table count
Parameters
•
vlan—Specifies VLAN.
•
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or port-channel.
Port Type
0 self
gi1 static
gi4 dynamic
gi5 dynamic
Port Type
static gi9
[vlan vlan | interface interface-id]
78-21075-01 Command Line Interface Reference Guide
Address Table Commands