Tacacs-Server Key - Cisco 300 Series Cli Manual

19
282
•
encrypted-key-string
key
format.
•
source-ip
source
communication. 0.0.0.0 is interpreted as a request to use the IP address of
the outgoing IP interface.
•
priority
priority
used, where 0 is the highest priority. (Range: 0-65535)
Default Configuration
No TACACS+ host is specified.
The default authentication port number is 1812.
If timeout is not specified, the global value (set in
If key-string is not specified, the global value (set in
If the source value is not specified, the global value (set in
or tacacs-server source-ipv6) is used.
If a parameter was not set in one of the above commands, the default for that
command is used. For example, if a timeout value was not set in the current
command or in tacacs-server
timeout is used.
Command Mode
Global Configuration mode
User Guidelines
Multiple tacacs-server host commands can be used to specify multiple hosts.
Example
The following example specifies a TACACS+ host.
switchxxxxxx(config)#
19.2

tacacs-server key

Use the tacacs-server key Global Configuration mode command to set the
authentication encryption key used for all TACACS+ communications between the
—Same as key-string, but the key is in encrypted
—Specifies the source IPv4 or IPv6 address to use for
—Specifies the order in which the TACACS+ servers are
timeout, the default timeout for
tacacs-server host
78-21075-01 Command Line Interface Reference Guide
TACACS+ Commands
tacacs-server timeout) is used.
tacacs-server
tacacs-server source-ip
tacacs-server
172.16.1.1
key) is used.