Cisco 300 Series Cli Manual page 178

9
178
User Guidelines
The Running Configuration file does not contain all the information that can be
displayed in the output. Only non-default configurations are displayed.
Examples
The following example displays the Running Configuration file contents.
Example 1 - Show the entire Running Configuration file.
switchxxxxxx# show running-config
no spanning-tree
interface range gi1-48
speed 1000
exit
no lldp run
interface vlan 1
ip address 1.1.1.1 255.0.0.0
exit
line console
exec-timeout 0
exit
switchxxxxxx#
Example 2 - Show the entire Running Configuration file for ports 1 and 2.
switchxxxxxx# show running-config interface fastethernet1/1/1-2
interface fastethernet1/1/1
back-pressure
duplex half
spee 10
flowcontrol on
negotiation 10h 100h 100f
dot1x max-req 8
Configuration and Image File Commands
78-21075-01 Command Line Interface Reference Guide