Show Qos Map - Cisco 300 Series Cli Manual

49
832
Syntax
qos map dscp-mutation
no qos map dscp-mutation [
Parameters
•
in-dscp—Specifies up to 8 DSCP values to map, separated by spaces.
(Range: 0–63)
•
out-dscp—Specifies up to 8 DSCP mapped values, separated by spaces.
(Range: 0–63)
Default Configuration
The default map is the Null map, which means that each incoming DSCP value is
mapped to the same DSCP value.
Command Mode
Global Configuration mode.
User Guidelines
This is the only map that is not globally configured. It is possible to have several
maps and assign each one to a different port.
Example
The following example changes DSCP values 1, 2, 4, 5 and 6 to DSCP Mutation
.
Map value 63
switchxxxxxx(config)#

49.37 show qos map

Use the show qos map EXEC mode command to display the various types of QoS
mapping.
Syntax
show qos map [dscp-queue | dscp-dp | policed-dscp | dscp-mutation]
in-dscp out-dscp
to
in-dscp
]
qos map dscp-mutation
78-21075-01 Command Line Interface Reference Guide
Quality of Service (QoS) Commands
1 2 4 5 6 to 63