20
292
switchxxxxxx(config)#
switchxxxxxx(config)#
20.5
clear logging
Use the clear logging Privileged EXEC mode command to clear messages from
the internal logging buffer.
Syntax
clear logging
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
The following example clears messages from the internal logging buffer.
switchxxxxxx#
clear logging
Clear logging buffer [confirm]
20.6
logging file
Use the logging file Global Configuration mode command to limit SYSLOG
messages sent to the logging file to messages with a specific severity level. Use
the no form of this command to cancel sending messages to the file.
Syntax
level
logging file
no logging file
logging buffered debugging
logging buffered 100 7
78-21075-01 Command Line Interface Reference Guide
Syslog Commands