Snmp-Server Filter - Cisco 300 Series Cli Manual

12
210
Priv Password (encrypted) :
User name
Group name
Authentication Algorithm
Privacy Algorithm
Remote
Auth Password (encrypted):
8nPzy2hzuba9pG3iiC/q0451RynUn7kq94L9WORFrRM=
Priv Password (encrypted) :

12.10 snmp-server filter

The snmp-server filter Global Configuration mode command creates or updates
an SNMP server notification filter. Use the no form of this command to remove a
notification filter.
Syntax
filter-name oid-tree {included | excluded}
snmp-server filter
no snmp-server filter
Parameters
•
filter-name—Specifies the label for the filter record that is being updated or
created. The name is used to reference the filter in other commands.
(Length: 1–30 characters)
•
oid-tree—Specifies the ASN.1 subtree object identifier to be included or
excluded from the view. To identify the subtree, specify a text string
consisting of numbers, such as 1.3.6.2.4, or a word, such as System. Replace
a single sub-identifier with the asterisk (*) wildcard to specify a subtree
family; for example, 1.3.*.4.
•
included—Specifies that the filter type is included.
•
excluded—Specifies that the filter type is excluded.
Network Management Protocol (SNMP) Commands
: u1OnlyAuth
: group1
: SHA
: None
:
filter-name oid-tree
[ ]
78-21075-01 Command Line Interface Reference Guide