Qos Statistics Policer - Cisco 300 Series Cli Manual

49
834
Parameters
N/A
Default Configuration
N/A
Command Mode
EXEC mode
Example
The following example clears the QoS statistics counters.
switchxxxxxx# clear qos statistics

49.39 qos statistics policer

Use the qos statistics policer Interface Configuration (Ethernet, Port-channel)
mode command to enable counting in-profile and out-of-profile. Use the no form of
this command to disable counting.
This command is relevant only when policers are defined.
Syntax
qos statistics policer
no qos statistics policer
Parameters
•
policy-map-name—Specifies the policy map name.
•
class-map-name—Specifies the class map name.
Default Configuration
Counting in-profile and out-of-profile is disabled.
Command Mode
Interface Configuration (Ethernet, Port-channel) mode
policy-map-name class-map-name
policy-map-name class-map-name
78-21075-01 Command Line Interface Reference Guide
Quality of Service (QoS) Commands