Interface Range; Shutdown - Cisco 300 Series Cli Manual

Ethernet Configuration Commands
78-21075-01 Command Line Interface Reference Guide
23.2

interface range

Use the interface range command to execute a command on multiple ports at the
same time.
Syntax
interface-id-list
interface range
Parameters
interface-id-list—Specify list of interface IDs. The interface ID can be one of the
following types: Ethernet port, VLAN, or Port-channel
Default Configuration
N/A
Command Mode
Interface Configuration (Ethernet, Port-channel, or VLAN) mode
User Guidelines
Commands under the interface range context are executed independently on
each interface in the range: If the command returns an error on one of the
interfaces, it does not stop the execution of the command on other interfaces.
Example
switchxxxxxx(config)# interface range gi1-20
switchxxxxxx(config-if-range)#
23.3

shutdown

Use the shutdown Interface Configuration (Ethernet, Port-channel) mode
command to disable an interface. Use the no form of this command to restart a
disabled interface.
Syntax
shutdown
no shutdown
23
347