Show Ip Dhcp Snooping - Cisco 300 Series Cli Manual

42
DHCP Snooping and ARP Inspection Commands
Syntax
clear ip dhcp snooping database
Parameters
N/A
Command Mode
Privileged EXEC mode
Example
The following example clears the DHCP Snooping binding database.
switchxxxxxx# clear ip dhcp snooping database

42.10 show ip dhcp snooping

Use the show ip dhcp snooping EXEC mode command to display the DHCP
snooping configuration for all interfaces or for a specific interface.
Syntax
show ip dhcp snooping [interface-id]
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
EXEC mode
Example
The following example displays the DHCP snooping configuration.
switchxxxxxx
# show ip dhcp snooping
DHCP snooping is Enabled
DHCP snooping is configured on following VLANs: 21
688 78-21075-01 Command Line Interface Reference Guide