Exit (Configuration); Exit (Exec) - Cisco 300 Series Cli Manual

User Interface Commands
78-21075-01 Command Line Interface Reference Guide
2.5

exit (Configuration)

The exit command exits any mode and brings the user to the next higher mode in
the CLI mode hierarchy.
Syntax
exit
Parameters
N/A
Default Configuration
N/A
Command Mode
All.
Examples
The following examples change the configuration mode from Interface
Configuration mode to Privileged EXEC mode.
switchxxxxxx(config-if)#
switchxxxxxx(config)#
2.6

exit (EXEC)

The exit EXEC mode command closes an active terminal session by logging off
the device.
Syntax
exit
Parameters
N/A
exit
exit
2
39