Rename - Cisco 300 Series Cli Manual

Configuration and Image File Commands
78-21075-01 Command Line Interface Reference Guide
Example
The following example specifies that image-1 is the active system image file
loaded by the device at startup. The results of this command is displayed in

rename.

switchxxxxxx# boot system image-1
switchxxxxxx#show bootvar
Image Filename Version
----- --------- ---------
1 image-1 1.1.0.73
2 image-2 1.1.0.73
"*" designates that the image was selected for the next boot
9.7 rename
The rename Privileged EXEC mode command renames a file.
Syntax
rename url new-url
Parameters
•
url—Specifies the file location URL. (Length: 1–160 characters)
•
new-url—Specifies the file's new URL. (Length: 1–160 characters)
"Flash://" is the source or destination URL scheme that specifies the access method to the local flash
memory. It simply stands for the root directory of the local flash. It is the default scheme for a URL that
does not explicitly contain a scheme/access method (e.g. for copying the running configuration file, the
user may either use flash://running-config or just running-conig).
The following table displays options for the URL parameter:
Keyword Source or Destination
WORD<1-12 Name of file (e.g. backup-config)..
8>
Date
---------------------
19-Jun-2011 18:10:49
19-Jun-2011 18:10:49
Status
-----------
Not active*
Active
9
175