Cisco 300 Series Cli Manual page 239

Telnet, Secure Shell (SSH) and Secure Login (Slogin) Commands
78-21075-01 Command Line Interface Reference Guide
Parameters
•
username
username
1–48 characters)
•
fingerprint {bubble-babble | hex}—Specifies the fingerprint display format.
The possible values are:
-
bubble-babble—Specifies that the fingerprint is displayed in Bubble
Babble format.
-
hex—Specifies that the fingerprint is displayed in hexadecimal format.
Default Configuration
The default fingerprint format is hexadecimal.
Command Mode
Privileged EXEC mode
Example
The following examples display SSH public keys stored on the device.
switchxxxxxx# show crypto key pubkey-chain ssh
Username Fingerprint
----------- ----------------------------------------------------------
9A:CC:01:C5:78:39:27:86:79:CC:23:C5:98:59:F1:86
bob
john 98:F7:6E:28:F2:79:87:C8:18:F8:88:CC:F8:89:87:C8
switchxxxxxx#
show crypto key pubkey-chain ssh username
Username Fingerprint
----------- ----------------------------------------------------------
bob 9A:CC:01:C5:78:39:27:86:79:CC:23:C5:98:59:F1:86
—Specifies the remote SSH client username. (Length:
14
bob
239