User Interface Commands
78-21075-01 Command Line Interface Reference Guide
Parameters
number-of-characters - Specifies the number of characters to be displayed for the
echo output of the CLI commands and the configuration file,'0' means endless
number of characters on a screen line. (Range: 0, 70-512)
Default Configuration
The default number of characters is 77.
Command Mode
Privileged EXEC mode
Example
The following example sets the terminal width to 100 characters
switchxxxxxx#
terminal width 100
2.15
terminal prompt
Use the terminal prompt EXEC mode command to enable the terminal prompts.
Use terminal no prompt command to disable the terminal prompts.
The command is per session and will not be saved in the configuration database.
Syntax
terminal prompt
terminal no prompt
Parameters
N/A
Default Configuration
The default configuration is prompts enabled.
Command Mode
Privileged EXEC mode
2
47