Show Gvrp Configuration - Cisco 300 Series Cli Manual

20
429
switchxxxxxx(config-if)#
switchxxxxxx(config-if)#

20.6 show gvrp configuration

To display GVRP configuration information, including timer values, whether GVRP
and dynamic VLAN creation are enabled, and which ports are running GVRP, use
the show gvrp configuration EXEC mode command.
Syntax
show gvrp configuration
Parameters
•
interface-id—(Optional) Specifies an interface ID. The interface ID can be
one of the following types: Ethernet port or port-channel.
•
detailed—(Optional) Displays information for non-present ports in addition
to present ports.
Default Configuration
All GVRP statistics are displayed for all interfaces. If detailed is not used, only
present ports are displayed.
Command Mode
User EXEC mode
Example
The following example displays GVRP configuration.
switchxxxxxx# show gvrp configuration
GVRP Feature is currently Enabled on the device.
Maximum VLANs: 4094
Port(s) GVRP-Status
---- ----------- --------
gi1
1 Enabled
GARP VLAN Registration Protocol (GVRP) Commands
interface gi13
gvrp vlan-creation-forbid
[interface-id | detailed
Regist- Dynamic
ration VLAN Creation
-------------
Forbidden Disabled
OL-32830-01 Command Line Interface Reference Guide
]
Timers(ms)
Join Leave Leave All
---- ----- ----------
600 200 10000