Spanning-Tree Mst Priority - Cisco 300 Series Cli Manual

Spanning-Tree Commands
78-21075-01 Command Line Interface Reference Guide
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Default Configuration
All interfaces.
Command Mode
Privileged EXEC mode
User Guidelines
This feature can only be used when working in RSTP or MSTP mode.
Example
This restarts the STP migration process on all interfaces.
switchxxxxxx# clear spanning-tree detected-protocols

31.18 spanning-tree mst priority

Use the spanning-tree mst priority Global Configuration mode command to
configure the device priority for the specified spanning-tree instance. Use the no
form of this command to restore the default configuration.
Syntax
instance-id priority priority
spanning-tree mst
no spanning-tree mst
Parameters
•
instance-id—Specifies the spanning-tree instance ID. (Range:1–15)
•
priority—Specifies the device priority for the specified spanning-tree
instance. This setting determines the likelihood that the switch is selected
as the root switch. A lower value increases the probability that the switch is
selected as the root switch. (Range: 0–61440)
instance-id priority
31
465