42
702
Syntax
ip arp inspection list create
no ip arp inspection list create
Parameters
name—Specifies the static ARP binding list name. (Length: 1–32 characters)
Default Configuration
No static ARP binding list exists.
Command Mode
Global Configuration mode
User Guidelines
Use the ip arp inspection list assign command to assign the list to a VLAN.
Example
The following example creates the static ARP binding list 'servers' and enters the
ARP list configuration mode.
switchxxxxxx(config)#
switchxxxxxx(config-ARP-list)#
42.25 ip mac
Use the ip mac ARP-list Configuration mode command to create a static ARP
binding. Use the no form of this command to delete a static ARP binding.
Syntax
ip-address
mac-address
ip
mac
ip-address
no ip
mac
Parameters
•
ip-address—Specifies the IP address to be entered to the list.
•
mac-address—Specifies the MAC address associated with the IP address.
DHCP Snooping and ARP Inspection Commands
name
name
ip arp inspection list create
mac-address
78-21075-01 Command Line Interface Reference Guide
servers