Show Platform Configuration - Cisco Catalyst 3750 Metro Command Reference Manual

show platform configuration

show platform configuration
Use the show platform configuration privileged EXEC command to display platform-dependent
configuration-manager related information.
Syntax Description config-output
default
running
startup
Command Modes Privileged EXEC
Command History Release
12.1(14)AX
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Catalyst 3750 Metro Switch Command Reference
C-4
show platform configuration {config-output | default | running | startup}
Display the output of the last auto-configuration application.
Display whether or not the system is running the default configuration.
Display a snapshot of the backed-up running configuration on the local
switch.
Display a snapshot of the backed-up startup configuration on the local switch.
Modification
This command was introduced.
Appendix C Catalyst 3750 Metro Switch Show Platform Commands
OL-9645-10