Green-Ethernet Short-Reach (Global) - Cisco 300 Series Cli Manual

27
Green Ethernet
Parameters
N/A
Default Configuration
Enabled
Command Mode
Interface configuration mode (Ethernet)
User Guidelines
Energy-Detect can work only when the port is a copper port. When a port is
enabled for auto selection, copper/fiber Energy-Detect cannot work.
It takes the PHY ~5 seconds to fall into sleep mode when the link is lost after
normal operation.
Example
switchxxxxxx(config)# interface gi1
switchxxxxxx(config-if)# green-ethernet energy-detect
27.3

green-ethernet short-reach (global)

Use the green-ethernet short-reach Global Configuration mode command to
enable green-ethernet short-reach mode globally. Use the no form of this
command to disabled it.
Syntax
green-ethernet short-reach
no green-ethernet short-reach
Parameters
N/A
Default Configuration
Disabled.
394 78-21075-01 Command Line Interface Reference Guide