Show Services Tcp-Udp - Cisco 300 Series Cli Manual

System Management Commands
78-21075-01 Command Line Interface Reference Guide
5.19

show services tcp-udp

Use the show services tcp-udp Privileged EXEC mode command to display
information about the active TCP and UDP services.
Syntax
show services tcp-udp
Parameters
This command has no arguments or keywords.
Command Mode
Privileged EXEC mode
User Guidelines
The output does not show sessions where the device is a TCP/UDP client.
Examples
switchxxxxxx# show services tcp-udp
Type Local IP Address Remote IP address
---------------------- ------------------- ------------- -----------
TCP All:22
TCP All:23
TCP All:80
TCP All:443
TCP 172.16.1.1:23 172.16.1.18:8789
TCP6 All-23
TCP6 fe80::200:b0ff:fe00:0-23
fe80::200:b0ff:fe00:0-8999
UDP All:161
UDP6A ll-161
Service Name State
SSH LISTEN
Telnet LISTEN
HTTP LISTEN
HTTPS LISTEN
Telnet ESTABLISHED
Telnet LISTEN
Telnet
ESTABLISHED
SNMP
SNMP
5
111