Sntp Authenticate - Cisco 300 Series Cli Manual

7
140
Syntax
sntp authentication-key
encrypted sntp authentication-key
no sntp authentication-key
Parameters
•
key-number—Specifies the key number. (Range: 1–4294967295)
•
key-value
—Specifies the key value. (Length: 1–8 characters)
•
encrypted-key-value
Default Configuration
No authentication key is defined.
Command Mode
Global Configuration mode
Examples
The following example defines the authentication key for SNTP.
switchxxxxxx(config)#
switchxxxxxx(config)# sntp authentication-key 8 md5 ClkKey
switchxxxxxx(config)# sntp trusted-key 8
switchxxxxxx(config)# sntp authenticate
7.7

sntp authenticate

The sntp authenticate Global Configuration mode command enables
authentication for received SNTP traffic from servers. Use the no form of this
command to disable the feature.
Syntax
sntp authenticate
no sntp authenticate
key-number key-value
md5
key-number
key-number
—Specifies the key value in encrypted format.
sntp authentication-key
78-21075-01 Command Line Interface Reference Guide
Clock Commands
key-value
md5 encrypted-
8 md5 ClkKey