Show Dot1X Advanced - Cisco 300 Series Cli Manual

22
344
Example
Example 1—The example enables user-based VLAN assignment. If the RADIUS
server authenticated the supplicant but did not provide a supplicant VLAN, the
supplicant is rejected.
switchxxxxxx(config)# interface 151
switchxxxxxx(config-if)# dot1x radius-attributes vlan
switchxxxxxx(config-if)# exit
Example 2—The example enables user-based VLAN assignment. If the RADIUS
server authenticated the supplicant but did not provide a supplicant VLAN the
supplicant is accepted and VLAN 100 is assigned to the supplicant.
switchxxxxxx(config)# interface 151
switchxxxxxx(config-if)# dot1x radius-attributes vlan 100
switchxxxxxx(config-if)# exit

22.24 show dot1x advanced

Use the show dot1x advanced Privileged EXEC mode command to display 802.1x
advanced features for the device or specified interface.
Syntax
show dot1x advanced
Parameters
•
interface-id—Specify an Ethernet port ID.
•
detailed—Displays information for non-present ports in addition to present
ports.
Default Configuration
Display for all ports. If the detailed parameter is not used, only present ports are
displayed.
[interface-id | detailed
78-21075-01 Command Line Interface Reference Guide
]
802. 1 X Commands