Smartport Commands; Macro Auto (Global) - Cisco 300 Series Cli Manual

Smartport Commands

78-21075-01 Command Line Interface Reference Guide
35.1

macro auto (Global)

The macro auto Global Configuration mode command sets the Auto Smartports
administrative global state. The no format of the command returns to the default.
Syntax
enabled
macro auto {
no macro auto
Parameters
•
enabled—Auto Smartport administrative global and operational states are
enabled.
•
disabled—Auto Smartport administrative global and operational states are
disabled.
•
controlled—Auto Smartport administrative global and operational states
are enabled when Auto Voice VLAN is in operation.
Default Configuration
Administrative state is controlled.
Command Mode
Global Configuration mode
User Guidelines
Regardless of the status of Auto Smartport, you can always manually apply a
Smartport macro to its associated Smartport type. A Smartport macro is either a
built-in macro or a user-defined macro. You can define and apply a macro using
the CLI commands presented in the Macro Commands section.
If the Auto Smartport Administrative state is controlled, the Auto Smartport
Operational state is managed by the Voice VLAN manager and is set as follows:
•
Auto Smartport Operational state is disabled when the OUI Voice VLAN is
enabled.
disabled controlled
| | }
35
554