Show Vlan Multicast-Tv - Cisco 300 Series Cli Manual

32
Virtual Local Area Network (VLAN) Commands
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
The user cannot transmit Multicast transmissions on Multicast TV VLANs.
A Multicast TV VLAN cannot be enabled if a Guest VLAN is enabled on the
interface.
Example
The following example enables gi5 to receive Multicast transmissions from VLANs
5, 6, 7.
switchxxxxxx(config)#
interface gi5
switchxxxxxx(config-if)# 5-7
switchport customer multicast-tv vlan add

32.31 show vlan multicast-tv

Use the show vlan Multicast-tv EXEC mode command to display the source and
receiver ports of Multicast-TV VLAN. Source ports can transmit and receive traffic
to/from the VLAN, while receiver ports can only receive traffic from the VLAN.
Syntax
vlan-id
show vlan Multicast-tv vlan
Parameters
vlan-id—Specifies the VLAN ID.
Default Configuration
N/A
Command Mode
EXEC mode
522 78-21075-01 Command Line Interface Reference Guide