Garp Vlan Registration Protocol (Gvrp) Commands; Gvrp Enable (Global); Gvrp Enable (Interface) - Cisco 300 Series Cli Manual

GARP VLAN Registration Protocol (GVRP) Commands

78-21075-01 Command Line Interface Reference Guide
41.1

gvrp enable (Global)

Use the gvrp enable Global Configuration mode command to enable the Generic
Attribute Registration Protocol (GARP) VLAN Registration Protocol (GVRP)
globally. Use the no form of this command to disable GVRP on the device.
Syntax
gvrp enable
no gvrp enable
Parameters
N/A
Default Configuration
GVRP is globally disabled.
Command Mode
Global Configuration mode
Example
The following example enables GVRP globally on the device.
switchxxxxxx(config)#
41.2

gvrp enable (Interface)

Use the gvrp enable Interface Configuration (Ethernet, Port-channel) mode
command to enable GVRP on an interface. Use the no form of this command to
disable GVRP on an interface.
Syntax
gvrp enable
gvrp enable
41
674