Dhcpv6 Commands; Ipv6 Dhcp Client Stateless - Cisco 300 Series Cli Manual

DHCPv6 Commands

78-21075-01 Command Line Interface Reference Guide
52.1

ipv6 dhcp client stateless

Use the ipv6 dhcp client stateless command in Interface Configuration mode to
enable DHCP for an IPv6 client process and to enable a request for stateless
configuration through the interface on which the command is run.
Use the no form of this command to disable requests for stateless configuration.
Syntax
ipv6 dhcp client stateless
no ipv6 dhcp client stateless
Parameters
This command has no arguments or keywords.
Default Configuration
Information request is disabled on an interface.
Command Mode
Interface configuration
User Guidelines
Enabling this command starts the DHCPv6 client process if this process is not yet
running and IPv6 interface is enabled on the interface.
This command enables the DHCPv6 Stateless service on the interface. The
service allows to receive the some configuration from a DHCP server passed in
the following options:
•
Option 23: OPTION_DNS_SERVERS - List of DNS Servers IPv6 Addresses
•
Option 24: OPTION_DOMAIN_LIST - Domain Search List
•
Option 31: OPTION_SNTP_SERVERS - List of SNTP Servers IPv6
Addresses
52
859