Switchport Forbidden Default-Vlan - Cisco 300 Series Cli Manual

32
512
Command Mode
EXEC mode
Example
The following example displays macs-groups information.
switchxxxxxx# show vlan macs-groups
MAC Address
--------------------- --------------------- ---------------------
00:12:34:56:78:90
00:60:70:4c:73:ff

32.23 switchport forbidden default-vlan

Use the switchport forbidden default-vlan Interface Configuration command to
forbid a port from being added to the default VLAN. Use the no form of this
command to revert to default.
Syntax
switchport forbidden default-vlan
no switchport forbidden default-vlan
Parameters
N/A
Default Configuration
Membership in the default VLAN is allowed.
Command Mode
Interface and Interface range configuration (Ethernet, port-channel)
User Guidelines
The command may be used at any time regardless of whether the port belongs to
the default VLAN.
Virtual Local Area Network (VLAN) Commands
Mask Group ID
20
40
78-21075-01 Command Line Interface Reference Guide
22
1