DHCP Snooping and ARP Inspection Commands
78-21075-01 Command Line Interface Reference Guide
Example
The following example displays the IP Source Guard configuration.
switchxxxxxx#
show ip source-guard configuration
IP source guard is globally enabled.
Interface
---------
21
gi
22
gi
23
gi
24
gi
32
gi
33
gi
34
gi
42.17 show ip source-guard status
Use the show ip source-guard status EXEC mode command to display the IP
Source Guard status.
Syntax
show ip source-guard status [
[vlan vlan]
[interface-id
Parameters
•
mac-address mac-address—Specifies a MAC address.
•
ip-address ip-address—Specifies an IP address.
•
vlan vlan-id—Specifies a VLAN ID.
•
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
EXEC mode
State
-------
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
mac-address mac-address] [ip-address ip-address]
42
695