Banner Login - Cisco 300 Series Cli Manual

2
50
Syntax
command
do
Parameters
command—Specifies the EXEC-level command to execute.
Command Mode
All configuration modes
Example
The following example executes the show vlan Privileged EXEC mode command
from Global Configuration mode.
Example
switchxxxxxx(config)# do show vlan
Vlan Name Ports
---- ---- ---------------------
1 1 gi1-39,Po1,Po2,
2 2 gi1
10 v0010 gi1
11 V0011 gi1,gi3
20 20 gi1
30 30 gi1,gi3
31 31 gi1
91 91 gi1,gi4
4093 guest-vlan gi1,gi3
switchxxxxxx(config)#
2.19

banner login

Use the banner login command in Global Configuration mode to specify a
message to be displayed before the username and password login prompts. This
banner is applied automatically on all the CLI interfaces: Console, Telnet and SSH
User Interface Commands
Type Authorization
-------- -------------
other Required
dynamicGvrp Required
permanent Not Required
permanent Required
permanent Required
permanent Required
permanent Required
permanent Required
permanent Guest
78-21075-01 Command Line Interface Reference Guide