Revision (Mst) - Cisco 300 Series Cli Manual

Spanning-Tree Commands
78-21075-01 Command Line Interface Reference Guide
Parameters
string—Specifies the MST instance name. (Length: 1–32 characters)
Default Configuration
The default name is the bridge MAC address.
Command Mode
MST Configuration mode
Example
The following example defines the instance name as Region1.
switchxxxxxx(config)#
switchxxxxxx(config-mst)#

31.25 revision (MST)

Use the revision MST Configuration mode command to define the MST
configuration revision number. Use the no form of this command to restore the
default configuration.
Syntax
revision value
no revision
Parameters
value—Specifies the MST configuration revision number. (Range: 0–65535)
Default Configuration
The default configuration revision number is 0.
Command Mode
MST Configuration mode
spanning-tree mst configuration
region1
name
31
471