Cisco 300 Series Cli Manual page 388

Small business 300 series managed switches command line interface guide release 1.3

Hide thumbs Also See for 300 Series:

Table of Contents

EEE Administrate status is enabled on ports: gi1-6, gi7

EEE Operational status is enabled on ports: gi1, gi3-6, gi2, gi5

EEE LLDP Administrate status is enabled on ports: gi1-5

EEE LLDP Operational status is enabled on ports: gi1-5

Example 2 - The following is the information displayed when a port is in state not

Present; no information is displayed if the port supports EEE.

switchxxxxxx>show eee gi10

Port Status: notPresent

EEE Administrate status: enabled

EEE LLDP Administrate status: enabled

Example 3 - The following is the information displayed when the port is in status

switchxxxxxx>show eee gi10

Port Status: DOWN

EEE capabilities:

Speed 10M: EEE not supported

Speed 100M: EEE supported

Speed 1G: EEE supported

EEE Administrate status: enabled

EEE LLDP Administrate status: enabled

Example 4 - The following is the information displayed when the port is in status

UP and does not support EEE,

switchxxxxxx>show eee gi2

Port Status: UP

EEE capabilities:

Speed 10M: EEE not supported

Speed 100M: EEE supported

Speed 1G: EEE supported

Current port speed: 1Gbps

78-21075-01 Command Line Interface Reference Guide

EEE Commands