Lldp Lldpdu - Cisco 300 Series Cli Manual

Link Layer Discovery Protocol (LLDP) Commands
78-21075-01 Command Line Interface Reference Guide
Parameters
seconds
interval —The device does not send more than a single notification in the
indicated period (range: 5–3600).
Default Configuration
5 seconds
Command Mode
Global Configuration mode
Example
switchxxxxxx
(config)# lldp notifications interval 10

37.13 lldp lldpdu

The lldp lldpdu Global Configuration mode command defines LLDP packet
handling when LLDP is globally disabled. To restore the default configuration, use
the no form of this command.
Syntax
filtering
lldp lldpdu { |
no lldp lldpdu
Parameters
•
filtering — Specifies that when LLDP is globally disabled, LLDP packets are
filtered (deleted).
•
flooding — Specifies that when LLDP is globally disabled, LLDP packets
are flooded (forwarded to all interfaces).
Default Configuration
LLDP packets are filtered when LLDP is globally disabled.
Command Mode
Global Configuration mode
flooding
}
37
611