Configuration and Image File Commands
78-21075-01 Command Line Interface Reference Guide
Example
The following example displays the active system image file that was loaded by
the device at startup and the system image file that will be loaded after rebooting
the switch.
switchxxxxxx#
show bootvar
Image
filename
Version
-----
--------
-------
1
image-1
1.1.04
2
image-2
1.1.0.5
"*": Designates that the image was selected for the next boot.
9.9
show running-config
The show running-config Privileged EXEC mode command displays the entire
current Running Configuration file contents or the contents of the file for the
specified interface(s).
Syntax
show running-config
Parameters
•
interface interface-id-list
can be one of the following types: Ethernet port, port-channel or VLAN.
•
detailed—Displays configuration with SSL and SSH keys.
•
brief—Displays configuration without SSL and SSH keys.
Default Configuration
All interfaces are displayed. If
detailed
.
Command Mode
Privileged EXEC mode
Date
-----------
23-Jul-2010
22-Jan-2010
[interface interface-id-list | detailed | brief]
—Specifies a list of interface IDs. The interface IDs
detailed
brief
or
Status
-----------
Active
Not active*
is not specified, the default is
9
177