Show Lldp Med Configuration - Cisco 300 Series Cli Manual

Link Layer Discovery Protocol (LLDP) Commands
78-21075-01 Command Line Interface Reference Guide

37.23 show lldp med configuration

Use the show lldp med configuration Privileged EXEC mode command to display
the LLDP Media Endpoint Discovery (MED) configuration for all ports or for a
specific port.
Syntax
show lldp med configuration
Parameters
•
interface-id—Specifies the port ID.
•
detailed—Displays information for non-present ports in addition to present
ports.
Default Configuration
If no port ID is entered, the command displays information for all ports. If detailed is
not used, only present ports are displayed.
Command Mode
Privileged EXEC mode
Examples
Example 1 - The following example displays the LLDP MED configuration for all
interfaces.
switchxxxxxx # show lldp med configuration
Fast Start Repeat Count: 4.
lldp med network-policy voice: manual
Network policy 1
-------------------
Application type: voiceSignaling
VLAN ID: 1 untagged
Layer 2 priority: 0
DSCP: 0
[interface-id | detailed
]
37
623