Virtual Local Area Network (Vlan) Commands; Vlan Database - Cisco 300 Series Cli Manual

Virtual Local Area Network (VLAN) Commands

78-21075-01 Command Line Interface Reference Guide
32.1

vlan database

Use the vlan database Global Configuration mode command to enter the VLAN
Configuration mode. This mode is used to create VLAN(s) and define the default
VLAN.
Use the exit command to return to Global Configuration mode.
Syntax
vlan database
Parameters
N/A
Default Configuration
VLAN 1 exists by default.
Command Mode
Global Configuration mode
Example
The following example enters the VLAN Configuration mode, creates VLAN 1972
and exits VLAN Configuration mode.
switchxxxxxx(config)#
switchxxxxxx(config-vlan)#
switchxxxxxx(config-vlan)#
switchxxxxxx(config)#
vlan database
vlan 1972
exit
32
487