Show Ip Source-Guard Configuration - Cisco 300 Series Cli Manual

42
DHCP Snooping and ARP Inspection Commands
command to manually retry locating TCAM resources for the inactive IP Source
Guard addresses.
The show ip source-guard inactive EXEC mode command displays the inactive IP
source guard addresses.
Example
The following example manually retries to locate TCAM resources.
switchxxxxxx# ip source-guard tcam locate

42.16 show ip source-guard configuration

Use the show ip source-guard configuration EXEC mode command to display the
IP source guard configuration for all interfaces or for a specific interface.
Syntax
show ip source-guard configuration [interface-id]
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
EXEC mode
694 78-21075-01 Command Line Interface Reference Guide