9
174
no spanning-tree
interface range gi1-48
speed 1000
exit
no lldp run
line console
exec-timeout 0
9.6
boot system
The boot system Privileged EXEC mode command specifies the active system
image file that will be loaded by the device at startup.
Syntax
{image-1 | image-2}
boot system
Parameters
•
image-1—Specifies that image-1 is loaded as the system image during the
next device startup.
•
image-2—Specifies that image-2 is loaded as the system image during the
next device startup.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Use the
rename
command to display the active image.
Configuration and Image File Commands
78-21075-01 Command Line Interface Reference Guide