Enable Authentication - Cisco 300 Series Cli Manual

17
252
no login authentication
Parameters
•
default—Uses the default list created with the aaa authentication login
command.
•
list-name—Uses the specified list created with
Default Configuration
The default is the aaa authentication login
Command Mode
Line Configuration mode
Examples
Example 1 - The following example specifies the login authentication method as
the default method for a console session.
switchxxxxxx(config)#
switchxxxxxx(config-line)#
Example
Example 2 - The following example sets the authentication login methods for the
console as a list of methods.
switchxxxxxx (config)#
switchxxxxxx (config)#
switchxxxxxx (config-line)#
17.4

enable authentication

The enable authentication Line Configuration mode command specifies the
authentication method for accessing a higher privilege level from a remote Telnet
or console. Use the no form of this command to restore the default authentication
method.
Authentication, Authorization and Accounting (AAA) Commands
command default.
line console
login authentication default
aaa authentication login authen-list radius local none
line console
login authentication authen-list
78-21075-01 Command Line Interface Reference Guide
aaa authentication login.