Call Hold; To Place A Call On Hold; To Retrieve A Call On Hold; Call Transfer - Panasonic KX-NT6 Series User Manual

* - NOTE: You can also press the pre-programmed button
for the extension you want to call rather than dialing the
extension number.
Making Calls – To an Outside Party:
* - NOTE: Your telephone may be programmed to go to an
outside line automatically when you go off-hook, if that is
the case, you will not need to press the CO Line key and
can skip that step.

Call Hold:

To Place a Call on Hold:

With the calling party live on the line –
Then either page or intercom the party the call is for and tell them
the line number the caller is held on.

To Retrieve a Call on Hold:

* - Press the flashing CO Line key where the calling party is on
hold.

Call Transfer:

Unannounced Call Transfer:
With the calling party live on the line –
This will transfer the calling party direct to the extension
and ring the phone.
(*)
(*)
(*)