Station Lockout Code Assignment
Technical Manuals Online! - http://www.tech-man.com
700 - Operation
the personal VM key is not assigned to the lowest-numbered key, it will not
flash to indicate VM messages.
The Station Lockout feature allows users to dial a Station Lockout code to
restrict their phone from being
Station Lockout codes can be assigned through the attendant phone.
To program a Station Lockout code:
1. Press the ON/OFF key.
The phone issues intercom dial tone.
The ON/OFF LED lights.
2. Press the CONF key.
3. Dial "#8."
4. Dial the extension number.
5. Enter the desired key code (four digits).
6. Press the HOLD
"STORE XXXX" (where "XxXx" is the key code) appears on the
7. Press the ON/OFF key.
The ON/OFF LED goes off.
A locked extension can be used for Intercom Calls.
Station Lockout key codes can also be set through system programming.
for outside calls.
Chapter 3. Attendant