Table of Contents
Advertisement
Chapter 4 Basic Switch Configuration
4.1 Basic Configuration
Basic switch configuration includes commands for entering and exiting the admin mode,
commands for entering and exiting interface mode, for configuring and displaying the switch
clock, for displaying the version information of the switch system, etc.
Command
Normal User Mode/ Admin Mode
enable [<1-15>]
disable
Admin Mode
config [terminal]
Various Modes
exit
show privilege
Except User Mode/ Admin Mode
end
Admin Mode
clock
set
[YYYY.MM.DD]
show version
set default
write
reload
show cpu usage
show cpu utilization
show memory usage
Explanation
The User uses enable command to step into
admin mode from normal user mode or modify
the privilege level of the users. The disable
command is for exiting admin mode.
Enter global mode from admin mode.
Exit current mode and enter previous mode,
such as using this command in global mode to
go back to admin mode, and back to normal
user mode from admin mode.
Show privilege of the current users.
Quit current mode and return to Admin mode
when not at User Mode/ Admin Mode.
<HH:MM:SS>
Set system date and time.
Display version information of the switch.
Restore to the factory default.
Save current configuration parameters to Flash
Memory.
Hot reset the switch.
Show CPU usage rate.
Show current CPU utilization rate.
Show memory usage rate.
4-1
Advertisement
Table of Contents
Troubleshooting
