Ulsm Configuration Task List - Planet WGSW-52040 Configuration Manual

57.2 ULSM Configuration Task List

1. Create ULSM group globally
2. Configure ULSM group
3. Show and debug the relating information of ULSM
1. Create ULSM group globally
Command
Global mode
ulsm group <group-id>
no ulsm group <group-id>
2. Configure ULSM group
Command
Port mode
ulsm group <group-id> {uplink |
downlink}
no ulsm group <group-id> {uplink |
downlink}
3. Show and debug the relating information of ULSM
Command
Admin mode
show ulsm group [group-id]
debug ulsm event
no debug ulsm event
explanation
Configure and delete ULSM group globally.
explanation
Configure the uplink/downlink port of
ULSM group, the no command deletes the
uplink/downlink port.
Explanation
Show the configuration information of
ULSM group.
Show the event information of ULSM, the
no operation disables the shown
information.
57-29