Igmp Snooping Vlan Configuration - Planet IGS-5225 Series User Manual

• Fast Leave
• Throtting
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.

4.3.5.5 IGMP Snooping VLAN Configuration

Each page shows up to 99 entries from the VLAN table, default being 20, selected through the "entries per page" input field.
When first visited, the web page will show the first 20 entries from the beginning of the VLAN Table. The first displayed will be
the one with the lowest VLAN ID found in the VLAN Table.
The "VLAN" input fields allow the user to select the starting point in the VLAN Table. The IGMP Snooping VLAN Configuration
screen in Figure 4-3-5-8 appears.
Ethernet switch that leads towards the Layer 3 multicast device or IGMP querier.
The Switch forwards IGMP join or leave packets to an IGMP router port.

Auto:
Select "Auto" to have the Industrial Managed Switch automatically
uses the port as IGMP Router port if the port receives IGMP query
packets.

Fix:
The Industrial Managed Switch always uses the specified port as
an IGMP Router port. Use this mode when you connect an IGMP
multicast server or IP camera which applied with multicast protocol to
the port.
 None:
The Industrial Managed Switch will not use the specified port as an
IGMP Router port. The Industrial Managed Switch will not keep any
record of an IGMP router being connected to this port. Use this mode
when you connect other IGMP multicast servers directly on the
non-querier Industrial Managed Switch and don't want the multicast
stream to be flooded by uplinking switch through the port that is
connected to the IGMP querier.
Enable the fast leave on the port.
Enable to limit the number of multicast groups to which a switch port can belong.
215
User's Manual of IGS-5225 series