Hdd/Ssd Install Order - Fujitsu PRIMERGY CX400 M4 Upgrade And Maintenance Manual

Hard disk drives (HDD), solid state drives (SSD) and 2.5-inch PCIe-SSD
– When installing HDDs with different bus technologies (SAS or SATA), first
install SAS drives and then SATA drives.
– Please refer to section
overview of the mounting sequence.
– Install dummy modules into unused HDD/SSD bays.
7.1.2

HDD/SSD install order

HDD/SSD bays assignment
Up to six HDDs/SSDs are installed in a cage. The cages are assigned to the
server nodes as follows.
CX400 M4 equipped with CX2550 M4 server nodes
PSU 2
PSU 1
Server nodes and PSUs (rear view)
0 1
Node 1
HDD/SSD cages and front panel (front view)
CX400 M4 equipped with CX2560 M4 server nodes
PSU 2
PSU 1
Server nodes and PSUs (rear view)
0 1 2 3 4
Node 1
HDD/SSD cages and front panel (front view)
CX400 M4
"HDD/SSD install order" on page 91
Node 4
Node 3
0 1
Node 2
Node 4
Node 3
5 0 1 2 3 4
Node 2
Upgrade and Maintenance Manual
0 1
Node 3
5 0 1 2 3 4
Node 3
for a complete
Node 2
Node 1
0 1
Node 4
Node 2
Node 1
5 0 1 2 3 4
Node 4
5
91