XSCF> sethostname bb#00 scf0-hostname
The following example sets the domain name example.com for XSCF.
XSCF> sethostname -d example.com
6.5.2
Setting an Ethernet (XSCF-LAN) IP Address
The XSCF-LAN is a LAN established for user access to the XSCF. Two XSCF-LAN
ports can be used, depending on the network configuration.
For the SPARC M12-1, set either or both of the following IP addresses:
- XSCF-LAN#0 of BB#00
- XSCF-LAN#1 of BB#00
Figure 6-1 Example of XSCF-LAN Settings
192.168.1.x (1)
Remarks - Configure the XSCF-LAN#0 and XSCF-LAN#1 ports such that they are on
different subnets. (See (1) in
Execute the setnetwork command with network interface information specified.
1.
The following example sets the IP addresses and net masks for XSCF-LAN#0 and
XSCF-LAN#1 of BB#00 to enable them.
XSCF> setnetwork bb#00-lan#0 -m 255.255.255.0 192.168.1.x
XSCF> setnetwork bb#00-lan#1 -m 255.255.255.0 192.168.2.a
6.5.3
Setting the Routing
1.
Execute the showroute command to display the routing environment.
BB#00
Master XSCF
LAN#0
LAN#1
192.168.2.a (1)
Figure
6-1.)
Chapter 6 Making the Initial System Settings
95